JXD 300

Mr. Dj M. · **Posted:** Sat Jul 03, 2010 7:56 pm

I think never, there was a guy on this forum section that saved different versions on his blogsite.
If you search true this section you can find it.

But I thought I never heard someone succeed with that version that should correspond with the later produced 300's.

shahidr100 · **Joined:** Mon Aug 02, 2010 12:22 am **Posts:** 2

Quote:

When I update the 980, it first has to be switched off.

Then I press the volume+ key as it says.

While holding that down, I connect the player to the computer. At this time you can let it go.

Windows does recognise it, but not as a removable storage device. It doesn't show up in My Computer but it does show up near the clock in
the task bar. There's an option to remove the hardware there but there's no drive letter or anything.

Now you just need to use the FRM software program.

When that's done, you can unplug the device, then reset it as the 'power on' LED will still be on. After that, you can turn it on normally.

Unfortunately, the latest update files for the 980 on the JXD download page seem to be broken.

Hi all,

I tried the method stated above in the quote to upgrade the formware of my JXD300 but i m not able to bring it to the upgrade mode. I have tried all the combination of the keys but in vain.

Anyone who can help on this please.

Thanks and regards
Shahid

Mr. Dj M. · **Posted:** Fri Aug 06, 2010 4:25 am

You need to press the triangle or X key and hold it, I'm not shure which one it was.
Look here: http://www.modelautoforum.nl/viewtopic. ... 52#p366252 in the manuals last chapter, from the first forum post.

coolguyfromkollam · **Joined:** Mon Aug 16, 2010 11:51 pm **Posts:** 51

hello did anyone do any updates for the jxd 300b player, i am willing to test it.

maybe xeon3d . Sir did u do any changes?

coolguyfromkollam · **Joined:** Mon Aug 16, 2010 11:51 pm **Posts:** 51

hello??? just reply

Mr. Dj M. · **Posted:** Sat Aug 28, 2010 1:03 am

Many done them, but I heard all failing....

coolguyfromkollam · **Joined:** Mon Aug 16, 2010 11:51 pm **Posts:** 51

hey mr Djm is jxd 300 firmware compatible for jxd 300b?

Mr. Dj M. · **Posted:** Sun Aug 29, 2010 5:00 am

No, that's the whole problem. Many people that bought the 300 after it was out already for a while, received the B series.
They tried updating and download the firmware of the JXD site, which resulted in many "broken" and shipped back to the seller, players.

coolguyfromkollam · **Joined:** Mon Aug 16, 2010 11:51 pm **Posts:** 51

hey Mr Djm i think i have a solution .

i earlier had a jxd 661 and my friend had a jxd 683 or jxd 692 (i dont remember which one my friend had)

and now i have jxd 300b . These 3 have the same way of displaying the files and same support for games and movies etc.

Is this helpful?

Mr. Dj M. · **Posted:** Tue Aug 31, 2010 2:00 am

I wouldn't try....
but there's a chance it might work.

MP4 Nation Forums
Back to MP4 Nation - The MP4 Nation Blog - The Raz Special - Themes

JXD 300

Who is online

MP4 Nation Forums Back to MP4 Nation - The MP4 Nation Blog - The Raz Special - Themes

JXD 300

Who is online

MP4 Nation Forums
Back to MP4 Nation - The MP4 Nation Blog - The Raz Special - Themes