Need help with my M66 (SOLVED?)

bobbylee · **Joined:** Fri Jan 30, 2009 2:32 am **Posts:** 481

Could some one else please download the teclast file (or someone who already has it) and see what the files look like to them and open the update file and see if it looks like it should...

The Warrior Poet · **Posted:** Fri Feb 05, 2010 8:58 pm

Here's what the tool I have looks like:

bobbylee · **Joined:** Fri Jan 30, 2009 2:32 am **Posts:** 481

:shocked:, yes mine looks like that except that instead of the chinese letters there are just !'s everywhere.

Could you please lead me through doing it without knowing what the !'s stand for ?

The Warrior Poet · **Posted:** Fri Feb 05, 2010 9:07 pm

I'm not sure, and the translation sucks:

TL-M66 Product firmware upgrade method

Step One: Firmware Download

Please copy the URL of the following web address bar, open and select download

http://www.teclast.com/topic.php?channe ... opicID=148 (at this click to open)

Step two: Install the driver RK28usb

Hold down the M66 after shutdown "volume reduction" key will not let go, and then use the data lines and computer connections. At this point the computer requests an

Installed RK28USB program. Select the download firmware decompression after the "drivers" folder for the installation is complete.

Step Three: Open the upgrade process and begin to upgrade

Unzip the downloaded firmware, click on "Upgrade procedure" and double-click to open "RK28BatchUpgrade.exe" procedure is as follows map;

After a long hold off the M66, "volume reduction" key will not let go (as icon buttons position), and then use the data lines and power

Brain connections, select the TL-M66.IMG firmware file, click the button to begin the upgrade.

Note: The "mandatory wipe" the disk is formatted, so I chose this operation, please be intraday data backup

bobbylee · **Joined:** Fri Jan 30, 2009 2:32 am **Posts:** 481

Sorry I don't quite understand that

I just want to know what buttons on the driver are you supposed to click because mine is not legible

maderin1 · **Joined:** Sun Sep 30, 2007 2:50 pm **Posts:** 20621

try this

connect the player to the PC by doing the old pressing volume button stuff?
player should be connected as a rock28USB device now, i assume you have already got the drivers installed properly
open the tool
click the small button at the top of the tool - load the M66 firmware
now click the big button, bottom left of the tool and wait!!

now wait and see what happens

i assume you have been reading the rowwor thread and seeing the MASSIVE difficulties she is having and that this may not work as the player seem incapable of accepting firmare

bobbylee · **Joined:** Fri Jan 30, 2009 2:32 am **Posts:** 481

i assume you have already got the drivers installed properly

nope that the problem

maderin1 · **Joined:** Sun Sep 30, 2007 2:50 pm **Posts:** 20621

way not, i thought you did the "holding buttons thing" and got the ADD NEW HARDWARE WIZARD pop up and followed the instructions in the thread that was linked to install the drivers, installing the drivers for this process is not the firmware and does not need the tool

bobbylee · **Joined:** Fri Jan 30, 2009 2:32 am **Posts:** 481

After I click the button at the bottom left there is box with a red X that shows up...

The Warrior Poet · **Posted:** Sat Feb 06, 2010 3:12 am

You're way confused. Installing the drivers doesn't need the tool. Holding the volume down button, while plugging in, should get you the install wizard for the drivers. Look at this thread, and you'll see how to install the drivers. From instruction 4 to 12. You'll have to use your drivers, of course: viewtopic.php?f=69&t=14799

MP4 Nation Forums
Back to MP4 Nation - The MP4 Nation Blog - The Raz Special - Themes